|
Post by Dr. Paint on Apr 24, 2007 12:41:02 GMT -5
As you all know the Riverside track surface is clay and the same tire that works at Kamikaze\Coquitlam isn't going to cut it.
The right tire for that surface is a mini pin tire for both buggy and truggy\ Monster trucks.
The propper tires for the clay surface are going to be in stock at race tech in about 7 days.
|
|
Nutter
Postin' my way up...
Posts: 60
|
Post by Nutter on Apr 25, 2007 1:34:18 GMT -5
Which tires? Holeshot MTRs?
|
|
|
Post by Dr. Paint on Apr 25, 2007 11:38:20 GMT -5
yes
|
|
|
Post by Dr. Paint on Apr 25, 2007 12:21:53 GMT -5
Can everyone who is interested let me know so I cam make sure enough of them have been ordered... cuz it realy sucks when you want something and it's not here or on backorder. My friend Jared has been waiting for his Mugen MBX-R for over 2 months (backordered) but it will be here in 3 days... so his wait it over.
|
|
Nutter
Postin' my way up...
Posts: 60
|
Post by Nutter on Apr 25, 2007 17:06:51 GMT -5
Put my name down for 2 pairs (so a set of 4) of truggy tires and 4 white Mugen truggy rims if they're in stock (will they be?). Not sure if I'll run at Riverside this season, but best to be prepared.
|
|
|
Post by Dr. Paint on Apr 25, 2007 19:41:24 GMT -5
yes, Friday, done.
|
|
|
Post by Pipeous on Apr 27, 2007 14:33:51 GMT -5
the whole track isn't clay, but all the jumps are.... I was out doing testing and my panther k2's were hooking up good. it was damp in a lot of places but still. I was going to try the cf's out next to see if more side bite makes a difference in the buggy.
|
|
|
Post by Dr. Paint on Apr 27, 2007 18:51:39 GMT -5
Trust me on this... Question: What is the surface in the corners made out of? Exactly! Now buy the correct tires or else you'll be 2 to 3 seconds per lap slower than the cars that do have the right tires.
|
|