D3V
Postin' my way up...
Posts: 72
|
Post by D3V on Nov 8, 2004 22:48:41 GMT -5
seb do u know whats the best springs to run on brca stock pro motor I think the brca stock pro is pretty much the same as the monster stock pro but the brca has Quad mags
|
|
|
Post by Dr. Paint on Nov 9, 2004 3:10:24 GMT -5
Here are the actual names:
1) Trinity Monster Stock 2) Epic Dual Magnet Binary 3) Epic Quad Magnet Binary (this one is not alowed for racing because it is Outlaw. It makes more Power than legal stock which is based on 2 Magnets only)
Go with two purple Trinity springs. If it's a more open track try red and green on the negativce side and see if you get more top end..keep gearing the same (once you found what the propper gearing is)
As I was testing on Sunday I found 2 pinions within one tooth of one another that work realy good...but what I'm trying to say is that before that I had it geared 1 tooth highr than what the two pinions that are working, and the motor got realy hot.
|
|
ReVoLuTiOn
I finally belong!! Woohoo!
>> RC DRIFTER <<
Posts: 219
|
Post by ReVoLuTiOn on Nov 9, 2004 3:11:05 GMT -5
When you dyno a motor you adjust the power meter to read exactly 100 and then you push "power test button" which puts load on it, which causes the number to go down to whaever. Well that motor had the most power instead of going down to 82 it went down to 83 only. so are you talking watts or is it just a dyno readout?
|
|
ReVoLuTiOn
I finally belong!! Woohoo!
>> RC DRIFTER <<
Posts: 219
|
Post by ReVoLuTiOn on Nov 9, 2004 3:12:19 GMT -5
i sold my tired monster stock with new armature for $25.... im such a nice guy ill pick up an epic sometime soon and get into elec racing.
|
|
|
Post by Dr. Paint on Nov 9, 2004 3:20:43 GMT -5
It is a power read out:
THe manual sais to do the falowing to calculate Watts:
100 / (100 - "power read out") * 12 = watts
|
|
D3V
Postin' my way up...
Posts: 72
|
Post by D3V on Nov 9, 2004 17:12:41 GMT -5
right now im run a 48 pitch 25t pinion on a 72t spur and it seems to work good
|
|
|
Post by Dr. Paint on Nov 9, 2004 21:41:47 GMT -5
it depends on the track man.... I bought 2 new pinions, and I'm actualy using them, they are the lowest ones I got for Stock.
They are the equivalent of 23 and 22 teeth pinions in 48p.
I think the next local race will be a big one....looks like it anyways.
|
|
D3V
Postin' my way up...
Posts: 72
|
Post by D3V on Nov 9, 2004 22:31:22 GMT -5
seb do u know where the track is I also heard that theres a new indoor track opening up in langley ;D
|
|
|
Post by Dr. Paint on Nov 10, 2004 16:02:51 GMT -5
The Evangelical Free Church 33218 Marshall Road.
**From Hwy 1, exit on McCullum(follow road to the right) when you get to MARSHALL turn left, follow road 3-4 blocks. the church will be on your left. Parking will be on the left side of building.
CLASSES GT1-Touring Modified...........open motor class, foam tires GT2-Touring 19T Spec.........Locked endbell 19's, Rubber tires GT3-Touring Stock...............Locked endbell 27's, Rubber tires F1 spec...................19t, Tamiya tires 1/12 scale...............19t, 4 cell, foams,
***5 cars will make a class or will not run(or may be mixed together)***
TIME Track is open to racers at 9am Drivers meeting at 11am First qualifyer at 11:15 Racing will end at 5:30pm
HOW MUCH? $15.00 for 1st class $8.00 for 2nd class
The new track is unknows untill the organizers release the official news.
|
|
D3V
Postin' my way up...
Posts: 72
|
Post by D3V on Nov 10, 2004 17:11:21 GMT -5
kool thanks ;D
|
|