|
Post by mrmojo on Apr 3, 2007 8:42:24 GMT -5
I was driving my revo 3.3 today when out of nowhere a puddle (deep enough for my truck to float) appeared. Anyway when the truck went into the water it stalled right away. I took it out,shut off the elecs. pulled the glow plug and air filter (motor saver) sprayed wd-40 into engine and cranked for a while. The airfilter was pretty wet. What else should i do to the motor?? do i need to pull the tranny,diffs etc and re lubricate?? Thanks
|
|
|
Post by Dr. Paint on Apr 6, 2007 11:49:35 GMT -5
U did the right thing... oil ip up so it won't start rusting + get everyting dry.
If you think you got a lot of watter in you transm. then take it apart otherwise store it in a warm place for the watter to evaporate.
For electronics... open them up and spray them down with Motor Spray then let dry in warm place.
|
|
|
Post by mrmojo on Apr 8, 2007 23:57:58 GMT -5
Thanks the only thing that dosen't work is my stupid transmitter and thats because i dropped it to run and grab my truck!!
|
|
|
Post by Dr. Paint on Apr 9, 2007 11:11:32 GMT -5
Got a brand new JR XS3 Radio system (Synthesized) with one z590 MG servo and one z270 standard servo for $220.
|
|