Shelby
I finally belong!! Woohoo!
Ex-Heli Kid
Posts: 109
|
Post by Shelby on Oct 24, 2004 22:37:39 GMT -5
my carb got really sticky at todays race, and i dont know why i tried sanding it and oiling it and it still didnt work..... can sum 1 help me out??
|
|
|
Post by JOKER on Oct 24, 2004 23:52:23 GMT -5
you running the wasp 26 too??? Adam was having the same problem today too with his Wasp??? Hmmm what kind of fuel are you two using??? Maybe try a different carb? I have a carb off a hyper 8 if you want to try it out and see???
|
|
|
Post by INFERNO on Oct 25, 2004 19:54:16 GMT -5
I have the WASP .26 in my MGT and noticed if the linkage was not aligned properly with the throw of the carb barrel then it could get sticky. Adjust the carb angle and position of the ball end on the carb so it is in the least restrictive position ( in other words move it to a position where there is little or no angle to the attached linkage from the servo or pivot arm) >This should eliminate most of the issues with binding carbs.
|
|
|
Post by Andrushca on Nov 1, 2004 0:05:10 GMT -5
Go figure...I'm more of a girl than I thought when it comes to certain things.Just when I thought there was a place of discussion for people having troubles with carbs and wanted to discuss the temptation of bagels ;D Good luck with your carburetors though!
|
|